THA 275 PnP

Amplifier
Type: Digital
Number of channels : 2 Channel
Max. Power (Watt): 360
Max. Power 2 Channel @4 Ohm (Watt): 2x150
Max. Power 1 Channel @4 Ohm (Watt): 1x400
Max. Power 2 Channel @2 Ohm (Watt): 2x180
RMS Power 2 Channel @4 Ohm (Watt): 2x75
RMS Power 1 Channel @4 Ohm (Watt): 1x190
RMS Power 2 Channel @2 Ohm (Watt): 2x90
Signal-/noise ratio at nominal power (dB): > 95
Signal-/noise ratio at 1 Watt (dB): > 80
Distortion factor at nominal power (1 kHz): < 0,05 %
Frequency response (Hz) -1dB: 10-30000
Thermal-Throttle-circuit: Yes
Attenuation factor at 4 Ohm: > 100
Stability normal mode (Ohm): 2
Stability bridge mode (Ohm): 4
Input impedance (kOhm): > 10
Input sensitvity (V): 0,3 - 8
High-pass filter crossover frequency (Hz): 10 - 250
High-pass filter edge steepness (dB/Octave): 12
Low-pass filter crossover frequency (Hz): 50 - 250
Low-pass filter edge steepness (dB/Octave): 12
Automatic starting: Highlevel-input
Pre-equipped for Plug & Play: Yes
LED for protect-mode: Yes

Inputs
Direct Aux-In (number of): 1
Direct Aux-In (connection type): 3.5 mm phone jack
Permanent supply: Yes
Ground: Yes
Max. cable diameter (mm²): 10
Ignition supply: Yes
Highlevel (number of): 2
Surface connector: Silver

Outputs
Loud speaker (number of): 2
Loud speaker (connection type): Screw
Loud speaker (max. cable diameter in mm²): 2,5
Connector material: Silver

General
Height x Width x Depth (mm): 41 x 170 x 159
Installation location: Dashboard, Leg room, Glove compartment, Boot