VPA 2140 Pro

Amplifier
Type: Analogue
Number of channels : 2 Channel
Max. Power (Watt): 1000
Max. Power 2 Channel @4 Ohm (Watt): 2x300
Max. Power 1 Channel @4 Ohm (Watt): 1000
Max. Power 2 Channel @2 Ohm (Watt): 2x500
RMS Power 2 Channel @4 Ohm (Watt): 2x150
RMS Power 1 Channel @4 Ohm (Watt): 500
RMS Power 2 Channel @2 Ohm (Watt): 2x250
Signal-/noise ratio at nominal power (dB): > 100
Distortion factor at nominal power (1 kHz): < 0,02 %
Frequency response (Hz) -1dB: 10-40000
Attenuation factor at 4 Ohm: > 200
Stability normal mode (Ohm): 2
Stability bridge mode (Ohm): 4
Input impedance (kOhm): > 10
Input sensitvity (V): 0,3 - 8
High-pass filter crossover frequency (Hz): 40-450
High-pass filter edge steepness (dB/Octave): 12
Low-pass filter crossover frequency (Hz): 65-4500
Low-pass filter edge steepness (dB/Octave): 12
Subsonicfilter crossover frequency (Hz): 20 - 55
Subsonicfilter edge steepness (dB/Octave): 12
Bass Boost setting range (dB): 0 - 12
LED for protect-mode: Yes

Inputs
Direct Aux-In (number of): 1
Direct Aux-In (connection type): 3.5 mm phone jack
Permanent supply: Yes
Ground: Yes
Max. cable diameter (mm²): 25
Ignition supply: Yes
Surface connector: Gold

Outputs
Loud speaker (number of): 2
Loud speaker (connection type): Screw
Loud speaker (max. cable diameter in mm²): 10
Connector material: Gold

General
Height x Width x Depth (mm): 54 x 260 x 476

Accessories included in delivery
Cable remote control: Yes
Second protection: Yes