VA 275

Amplifier
Type: Analogue
Number of channels : 2 Channel
Max. Power (Watt): 425
Max. Power 2 Channel @4 Ohm (Watt): 2 x 160
Max. Power 1 Channel @4 Ohm (Watt): 425
Max. Power 2 Channel @2 Ohm (Watt): 2 x 210
RMS Power 2 Channel @4 Ohm (Watt): 2 x 75
RMS Power 1 Channel @4 Ohm (Watt): 210
RMS Power 2 Channel @2 Ohm (Watt): 2 x 105
Signal-/noise ratio at nominal power (dB): > 95
Signal-/noise ratio at 1 Watt (dB): > 80
Distortion factor at nominal power (1 kHz): < 0,03 %
Frequency response (Hz) -1dB: 10-35000
Attenuation factor at 4 Ohm: > 100
Stability normal mode (Ohm): 2
Stability bridge mode (Ohm): 4
Input impedance (kOhm): > 10
Input sensitvity (V): 0,3 - 8
High-pass filter crossover frequency (Hz): 50 - 250
High-pass filter edge steepness (dB/Octave): 12
Low-pass filter crossover frequency (Hz): 50 - 250
Low-pass filter edge steepness (dB/Octave): 12
Bass Boost setting range (dB): 0 - 12
LED for protect-mode: Yes

Inputs
Direct Aux-In (number of): 1
Direct Aux-In (connection type): 3.5 mm phone jack
Permanent supply: Yes
Supply voltage : Yes
Max. cable diameter (mm²): 10
Ignition supply: Yes
Highlevel (number of): 2
Surface connector: Gold

Outputs
Loud speaker (number of): 2
Loud speaker (connection type): Screw
Loud speaker (max. cable diameter in mm²): 6
Connector material: Gold

General
Height x Width x Depth (mm): 54 x 240 x 258